HOME

NEW PRODUCT

PRODUCTS

SYSTEMS

Units

Embedded

Analog

Digital

Stand-alone

Accessories

Utilities

SUPPORT

DEALERS

CONTACTS

ABOUT HAUCH & BACH

CGM 85.1


CAN-bus Gateway Module - System 80Ū


      

The CAN-bus Gateway Module for the System 80 provides a robust solution for control and monitoring of up to 64 nodes of the System 80 backplane family. It provides System 80 with a industrial standard gateway for controlling the units in the weighing process system.








Product highlights

  • Applies to the industrial standards
  • Based on CANopen
  • DB9-male bus connection onto the CANopen network (CiA 303-1 standard)
  • Dip switch for setting the node address
  • Communication speed from 10kB to 1MB
  • Use the H&B CAN-monitor to control the units
  • LED indication for: CAN con, Power and local bus activity




Product qualities

The building concept is a separate, full metal encapsulated module to be plugged into the module base board which ensures the interconnection between all nodes. The communication parameters may be downloaded directly from a lab top PC and status- and control indicators are available. The CANbus Gateway Module reduces the installation time, is fool-proof.
The CGM 85.1 gateway allows connection to a CANopen network. A variety of different network masters can be used.
DP 9-pin male D-shell connector for interconnecting onto CANopen network.
Quick set-up utilizes DIP-switches for CANopen node address 0-126.
Communication speed can be set from 10kB to 1MB (factory default is 500kB).
Visual indication via LEDīs for: CAN com. OK; Power OK and local bus activity.
With the H&B utility CAN-monitor you can control, monitor and calibrate the units in System 80, like reading all the input values from the LDMs



Download files


 EDS file

 CGM 85.1

 Firmware: CGM 85.181.v.1.42



Related accessories


:: MB 89.1



Related support


:: CGM 85.1 - Product sheet



Hauch & Bach - Femstykket 6 - DK-3540 Lynge - Denmark - Phone: +45 4816 0880 - Email: click here