ABOUT HAUCH & BACH
This is a collection of applications to do test and maintenance on H&B products or load cells. This includes Firmware upgrade or simple data collection from load cell(s) being subjected to various environment changes.
This programmer is used to update Firmware in H&B modules.The Programmer is mainly for MCS-64, but it can also be used to program other H&B modules.
This program can download firmware to LDU´s 1) Short the prog-switch to the right (if you look from the bottom)of the 10pin double row pinconnector. 2) Turn on the power. 3) Start the program, load the *.a20 file and press Program button. The bootloader file ´´Prog78.a20´´ must be placed in the same folder as LDU Download.
Application monitorThis is a monitor to collect data from multiple LDU78, LDU68 or LDU69 modules.The modules are scanned with a specified interval and the values written to a CSV file to be readable by e.g. MS Excel
Hauch & Bach - Femstykket 6 - DK-3540 Lynge - Denmark - Phone: +45 4816 0880 - Email: click here